Coastal Machinery Company Inc.
Quality New and Used Woodworking Machinery
Coastal Machinery Company
NC 28557
ph: 336-210-0121
coastalm
Brandt Ambition 1110 FB Edgebander Stock# 1491
Brandt Ambition 1110 FB Edgebander
Specifications:
Technical Specifications:
Price: $21,995.00
FOB: Southeast
Condition: As taken from service. Machine may be inspected
Specifications subject to verification
_HolzHer Model 1402 Edgebander Stock# 1473 SOLD
HolzHer Model 1402 Edgebander
Machine Description:
COMBINATION FLUSH, CHAMFER & RADIUS TRIM UNIT
Machine Dimensions:
Working Dimensions:
Edge Strip Thickness: 0.3 - 5mm
Edge Strip Width: 50mm
Panel Thickness: 6-45mm
Edge Strip Length: 200mm minimum - Unlimited
Feed Speed: 36FPM
Sound Enclosure
Voltage: 230V/3Ph/60Hz
Price: $6,395.00
FOB: Northeast
Condition: May be inspected in plant. Sold as Is Where Is No warranty
Specifications subject to verification
_______________________________________________________________________________________________
Brandt Optimat HD 67C Edgebander Stock# 1462
Brandt Optimat HD 67C Edgebander
Description:
Price: $12,900.00
FOB: South
Condition: As Taken from Service. May be inspected under power. Sold As Is
Specifications subject to verification
__________________________________________________________________________
SCMI / IDM ID Base 100 Model RS2 Edgebander Stock# 1445
SCMI / IDM ID Base 100 Model RS2 Edgebander
Edgebander with Pre-Milling, Corner Rounding
Working Capacity: Edge thickness, 0.4 - 12 mm (1/2"), max. edge height, 60 mm (2-3/8"), max. (w/corner rounding 1-3/4"), min. panel width 60 mm (4.0") and 140 mm (7" min. length)
Equipped with: -- In-feed Fence, "Easy Size", with electronic programmable positioning
Pre-Milling Unit RT-E 1.8 KW, 2 x 1.8 Kw (2.5 HP) 9,000 RPM motors with digital indicators for positioning.
Edge Magazine, automatic strip & coil feed magazine, w/Heavy Duty 3 mm PVC cap. guillotine.
Gluing System, VC/1000, Teflon coated EVA (Hot Melt) with overhead pre-melter, glue roller application system complete w/automatic recycling device for unused glue, digital thermostat adjustment for temperature control.
Side Pressure Section, 4-roller (1st. driven) pressure section w/pneumatic controls for all pressure rollers, electronic positioning of pressure rollers.
Workstations:
Double motor front & rear end trim (0.4 HP - 12,000 RPM motor ea.), tilts 0° - 15°, end trimmers mounted on 45° THK guide.
Top & bottom flush trims (0.8 HP - 12,000 RPM motor ea.), bevels 0° - 15°. -- Top & bottom fine/radius trimmer (0.8 HP - 12,000 RPM motors) w/pneumatic positioning from control panel.
(2) -Motor Corner Rounding units for top & bottom of leading & trailing corner when edgebanding all (4) sides (two 0.5 HP - 200 Cy motors ea.).
Top & bottom PVC Scraper for up to 5 mm radius.
Top & bottom buffing unit (0.33 HP - 2,800 RPM motors)
Hot Air Heating Unit: For restoring color on scraped PVC edges.
Feed & Speed: Single 12/18 M/M, 1 HP drive; heavy 3/4" drive chain with chain pads traveling on round & flat tracks.
Complete with: Orion 200 Controller Numerical Control with PLC
Microprocessor for line control & glue temperature (can store up to 50 preset programs), swivel control panel. -- Pneumatic positioning of super finish, full cover sound enclosure. -- 200 Cy - 5 kW Frequency inverter w/automatic motor brakes for all HF motors
Return Conveyor shown in picture is NOT included.
Complete with all manuals and included all used tooling.
Voltage: 230V/3ph/60cy
Price: $49,995.00
FOB: Midwest
Condition: Machine is in service. May be inspected. Machine well cared for with regular maintenance
Specifications subject to verification
__________________________________________________________________________
Virutex EB25 Edgebander Stock# 1442
Virutex EB25 Edgebander
For panel edge banding with pre-glued PVC, Melamine and wood veneer tapes.
Automatic power feeder with speed of 15 Ft. per minute. Motorized top and
bottom flush trimming unit. Automatic front and back flush edge trimming.
No compressed air or dust collector required.
Specifications:
- Speed of 15 Ft. Per minute.
- Advanced power feeder with:
- Brushless motor
- Multi Layered Belt backed with hard rubber wheels for a better grip and stable movement
- Board thickness range from 7/16" up to 2" thick
- Maximum tape thickness: up to 1 mm
- Electronic temperature control with range of : 0 - 900 F ( 0 - 500 C)
- 220 Volts, Single, 20 Amps, 3,000 W.
- Welded steel structure with great stability
- Net weight: 260 Pound
- Dimensions: 67" x 37" x 53"
Year: 2006 Low Usage
Price: $3,595.00
FOB: Southeast
Condition: As taken from service. Sold As Is.. May be inspected under power
Specifications subject to verification
__________________________________________________________________________
Copyright 2011 Coastal Machinery Company. All rights reserved.
Coastal Machinery Company
NC 28557
ph: 336-210-0121
coastalm